ViewSonic PJ358 User Manual page 35

INPUT Menu
INPUT Menu (continued)
Item Description
The resoluton for the COMPUTER IN1 and COMPUTER IN2 nput
sgnals can be set on ths projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and
press the ► button.
The RESOLUTION menu wll be dsplayed.
(2) In the RESOLUTION menu, select the
resolution you wish to display using the ▲/▼
buttons.
Selectng AUTO wll set a resoluton
approprate to the nput sgnal.
(3) Pressing the ► or ENTER button when
selectng a STANDARD resoluton wll
automatcally adjust the horzontal and
COMPUTER 1
vertcal postons, clock phase and horzontal
1280x 768@ 60
sze and automatcally select an aspect rato.
The INFORMATION dalog wll be dsplayed.
(4) To set a custom resoluton use the
▲/▼ buttons to select the CUSTOM and
the CUSTOM RESOLUTION box wll be
RESOLUTION
dsplayed. Set the horzontal (HORZ) and
vertcal (VERT) resolutons usng the
▲/▼/◄/► buttons.
Although not all resolutons are guaranteed.
(5) To save the settng place the cursor on the
right-most digit and press the ► button.
COMPUTER1
The horzontal and vertcal postons,
992x 744@ 60
clock phase and horzontal sze wll be
automatcally adjusted and an aspect rato wll
be automatcally selected.
After the INFORMATION dalog has dsplayed
for about 10 seconds the screen wll return
to the RESOLUTION menu dsplayng the
changed resoluton.
(6) To revert back to the prevous resoluton
wthout savng changes place the cursor on
the left-most digit and press the ◄ button.
The screen wll then return to the RESOLUTION menu dsplayng the
prevous resoluton.
• For some pctures, ths functon may not work well.
ViewSonic PJ358 30