q
1. Idle speed adjust screw (×2)
cC
8 Idle speed adjust screws were preset
at the factory. When adjusting idle
speed, turn the right and left idle
speed adjust screws the same amount,
or carburetor synchronization will be
incorrect.
8 The pilot air screws and idle speed
adjust screws are separate adjust-
ments but they must be adjusted at
the same time to achieve optimum
engine performance.
EBU00307
Throttle lever adjustment
NOTE:
Adjust the engine idling speed before
adjusting the throttle lever free play.
1. Loosen the locknut.
2. Turn the adjusting bolt until the throttle
lever free play is 4 ~ 6 mm (0.16 ~ 0.24
in).
3. Tighten the locknut.
q w
1. Adjusting bolt
a. 4 ~ 6 mm (0.16 ~ 0.24 in)
8-25
a
2. Locknut