Echo Back - Yamaha RX-17 Authorized Product Manual

28
then return to the display for MIDI Function 1. The data has now been transmitted to
the receiving RX17.
If transmitting data to a QX1, you can also execute the actual transmission by sending
a "Bulk Dump Request" from the QX1. In this case, the MIDI OUT of the QX1 must
be connected to the MIDI IN of the RX17, as well as the QX1's MIDI IN to the RX17's
MIDI OUT.

5.8 ECHO BACK

This function allows you to set the RX17's MIDI OUT connector to act as a MIDI THRU
connector. Any MIDI signals received at the MIDI IN connector will be output unchanged
via the MIDI OUT connector. See 6.5.1 MIDI CLOCK IN and 6.5.3 MIDI NOTE RECEIVE
for applications of this Function.
1. Press MIDI then select Function 6.
2. Press +1 YES to turn the Echo Back Function ON, or –1 NO to turn the Echo back
Function OFF.