Load; Verify - Yamaha RX-17 Authorized Product Manual

24
This Function allows you to load a complete set of Pattern and Song data from cassette
into the RX17's internal memory.
NOTE: When you load data into the RX17, ALL Patterns and Songs in the internal
memory will be erased. Be sure that you do not need this data, before you load the new
data. If you need the data in the internal memory, save it to another cassette before
loading new data.
1. Press CAS then select Function 2.
2. Make sure that the cassette containing the data is loaded into the cassette recorder,
and is cued to playback from the beginning of the data you wish to load. Also make
sure that the playback level is high. Press +1 YES.
3. Start the cassette recorder running in the play mode. It takes about one minute to
load an average set of Pattern and Song data. After loading, the LCD will show
then return to the Cassette Function Select display.

4.2 LOAD

4.3 VERIFY

This Function allows you to check that the data has been correctly saved onto tape, by
comparing the data saved on tape with the data in the RX17's internal memory. It should
be executed immediately after saving data.
1. Press CAS then select Function 3.
2. Make sure that the cassette containing the data is loaded into the cassette recorder,
and is cued to playback from the beginning of the data you wish to verify. Press
+1 YES.
3. Start the cassette recorder running in the play mode. It takes about one minute to
verify an average set of Pattern and Song data. After verifying, and provided the data
has been correctly saved, the LCD will show
then return to the Cassette Function Select display.
Stop the cassette recorder.