Advertisement
Fade in or out with a white screen.
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to
the next.
Fade or Wipe works when tape recording is started or
when you stop recording.
1 Set the VIDEO/DSC Switch O to "VIDEO" (GR-DgO/
D70 only), then set the Power Switch _) to "[]"
while
pressing down the Lock Button _ located on the
switch. Open the LCD monitor fully or pull out the
viewfinder fully.
2 Press the MENU/VOLUME wheel _ in. The Menu
Screen appears.
3 Rotate the MENU/VOLUME wheel _ to select
"_
WIPE/FADER", then press it.
4 Rotate the MENU/VOLUME wheel _) to select the
desired function, then press it. Selection is complete.
Press the MENU/VOLUME wheel _) in again.
• The WIPE/FADER Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
5 Press the Recording Start/Stop Button _ to activate
the Fade-in/out or Wipe-in/out.
To Deactivate The Selected Effect...
..... select "OFF" in step 4,
Some Fade/Wipe Effects cannot be used with certain
modes of Program AE with special effects (_
pg. 23).
If an unusable Fade/Wipe Effect is selected, its
indicator blinks or goes out.
NOTE:
You can extend the length of a Fade or Wipe by pressing
and holding the Recording
Start/Stop
Button _.
Fade in or out with a black screen.
Fade in to a color screen from a black and white
screen, or fade out from color to black and white.
Wipe in on a black screen from the upper right to the
lower _eftcorner, or wipe out from lower left to upper
right, leaving a black screen.
The scene starts in the center of a black screen and
wipes in toward the corners, or comes in from the
corners, gradually wiping out to the center.
Wipe in from right to left, or wipe out from left to right.
Wipe in as the two halves of a black screen open to the
left and right, revealing the scone, or wipe out and the
black screen reappears from left and right to cover the
scene.
The scene wipes in from the bottom to the top of a
black screen, or wipes out from top to bottom, leaving a
black screen.
Wipe in from the center of a black screen toward the
top and bottom, or wipe out from the top and bottom
toward the center leaving a black screen.
EN
24 FORRECORDING
Advertisement
