Advertisement
i:i!i:iiiii!iiii
_iiii!i:ii_!
¸
I
NOTES:
• If Stop mode continues
for 5 minutes when power is
suppIied from a battery, the casT.order
shuts off
automatlcally.
TO turn on again, set the Power Switch
to "OFF (CHARGE)",
then to "PLAY".
• The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected
TV (_t_?pg. t 6).
• You can also view the playback picture on the LCD
monitor with it flipped over and pushed against the
camera body.
• LCD monitor/viewfieder
indications:
• When power is supplied from a battery: the "_"
battery pack remaining
power indicator is displayed.
When power is supplied from an AC outlet: "_
"does
not appear.
• During Stop mode, none of the indications are
displayed.
• When a cable is connected
to the AV connector, the
sound is not heard from the speaker.
• It still playback continues
for more than about 3 minutes,
the camcorder's
Stop mode is automatically
engaged.
• When I-/11 O is pressed to engage still playback, the
image may not pause immediately
while the camcorder
stabilizes the still image.
Helps you find where you should start recording in the
middle of a tape to avoid time code interruption
(_r? pg. 14).
I Load a tape (_
pg. 9).
2 Set the VIDEO/DSC Switch O to "VIDEO" (GR-Dg0/
D70 only), then set the Power Switch _) to "PLAY"
while pressing down the Lock Button _ located on the
switch.
3 Press BLANK SEARCH t_).
• "BLANK SEARCH" [] appears and the camcorder
automatically starts reverse or forward shuttle search,
then stops at the spot which is about
3 seconds of tape before the beginning of the
detected blank portion,
To cancel Blank Search midway...
..... press • O.
NOTES:
• In step 3, if the current position is at a blank portion the
camcorder
searches
in the reverse direction, and it the
current position
is at a recorded portion the camcorder
searches in the forward direction.
• Blank Search does not work if "HEAD CLEANING
REQUIRED.
USE CLEANING
CASSETTE"
has appeared
with the tape.
• If the beginning or end of the tape is reached during
Blank Search, the camcorder
stops automatically.
• A blank podion which is shorter than 5 seconds of tape
may not be detected.
• The detected blank portion may be located between
recorded scenes. Before you start recording,
make sure
there is no recorded
scene alter the blank portion.
iiii!i!
EN
TAPE PLAYBACK
15
Advertisement
