Package Contents - ViewSonic ViewPanel VP151 User Manual

Package Contents

• ViewSonic VP151 ViewPanel
• DC Power supply
Power cables connect to DC
Power supply. The DC Power
supply connects to DC IN port on
base.
E
• Detachable video cable (15
N
G
pin HD D-sub)
L
Required to receive Analog RGB
I
S
video signal from PC
H
• Power cord/USA type
Connects wall outlet to DC Power
supply
• Power cord/SCHUKO type for
Europe
Connects wall outlet to DC Power
supply
• Small Digital flat panel (DFP)
cable (connects base to head,
pre-attached)
T
ransmits video signal from base
to head. Required for analog
operation.
• Small DC Power cable
(connects base to head, pre-
attached)
Transmits power from base to
head. Required for analog
operation. For wall mount
configuration, DC Power supply
connects directly to head.
• Small USB cable (connects
base to head, pre-attached)
Joins USB hubs in base and head
for dual operation. User will need
a separate USB cable
6
Getting Started
to computer for dual hub operation
(step 3 pg 9). For independent
operation such as dual computer
uses or wall mount configuration,
disconnect small USB cable.
• USB upstream cable (1.8 m)
Connects USB to computer.
Required for USB use.
• 3.5 mm stereo mini PC audio
cable
Connects computer sound card to
one of the VP151 audio INPUT
ports.
• 3.5 mm stereo mini dual RCA
audio cable
Connects audio from an external
video source (e.g., VCR) to the
VP151(audio INPUT jacks).
• 1.18 m RCA composite video
cable
Connects video signal from
external video source (e.g., VCR)
to the VP151 composite video
jack.
• VS Mac Adapter
Needed for older Macintosh
systems. Not required for G3
and/or PC use.
• User's guide
• PerfectPortrait
Must be installed to use
ViewPanel in Portrait mode (see
page 10)
• INF and ICM installation file
on CD-ROM
to connect
TM
on CD-ROM
ViewSonic VP151 ViewPanel ®