Table of Contents
Advertisement
Installation-Wall Mount
A wall installation includes a digital data connection (CPU) and a USB connection
(optional). NOTE: The kit for attaching a ViewPanel
information concerning obtaining a wall mounting kit, contact ViewSonic
To convert the desk-mounted VP151 to a wall-mount installation, do the following:
1 Remove plastic neck covers
Remove the plastic covers from
the neck to expose the mounting
screws.
2 Disconnect neck from base
Disconnect the neck from the
head by removing the four
screws on the back of the
ViewPanel.
3 Disconnect DC power from
base
Disconnect the DC power supply
from the base of the ViewPanel
(see steps 3 and 4, page 6) and
connect to the ViewPanel head
(see step 3 in figure below).
4 USB Installation (optional)
•
Remove the USB cable
connecting the base to the
Head
DC power
supply(step 3)
Base
ViewSonic VP151 ViewPanel
head (see step 1, USB Installation,
page 8).
•
5 Disconnect DFP cable from
base
Disconnect the short digital flat
panel (DFP) cable that connects
the base of the ViewPanel to the
head (see step 2, page 7).
6 Connect DFP cable from
computer
Connect the digital flat panel
(DFP) cable from the computer to
the head of the ViewPanel.
7 Attach ViewPanel to wall kit
Mount the ViewPanel head on the
wall using a VESA-compliant wall
mount. NOTE: To order a wall
mounting kit, contact ViewSonic.
Neck
®
®
to the wall is not included. For
Connect the USB cable from the
computer to the USB IN port on
head of the ViewPanel.
Mounting
screws (steps 1
and 2)
USB cable
(step 4)
®
DFP cable
(step 6)
9
Getting Started
E
N
G
L
I
S
H
Advertisement
Table of Contents
