Play Mode - Korg PANDORA ToneWorks PX1 Owner's Manual

Try it out
When you finish making connections, set
the power switch in the "Play" position.
Use the + / — buttons to select a program.
Select a clean-type program that will be
suitable for making volume settings. (As
an example here, we will select Program 4
"MODERN" .)
program name
O®)
program number
i Jiao)
"Fe,
MODE
Set the volume control of the guitar to its
usual position. Press the A or V buttons
and the master level will be displayed.
Continue pressing the A or V buttons to
adjust the volume.
©)
@
master level
eae)
MODERN
mm J
PANDORA does not have an input volume
control. If the sound still distorts even
when the master level is lowered, lower
the volume of the guitar.
For further details refer to the explanations
of Play Mode and Edit Mode.
Play mode
Set the power switch to the right position.
Play mode is the mode in which you will
normally use PANDORA.
1. Program change
You can select from 20 user programs. Press
the +, — buttons to select programs.
te. TLIC ba
b Pree hy Oe)
Program number
2. Master level
Press the A" V buttons and the current
master level value will be displayed in the
LCD.
©
aoe
é
vy YPvEde @)
Master level
vawe Its
By continuing to press the A" V buttons
you can set the master level. The master
level is remembered each time it is set, and
will be remembered even when the power
is turned off.
3. Bypass / Mute
When the bypass button is pressed, the chain
display( ) will
change to slow blinking, and the direct sound
(unprocessed by the effects) will be output. If
you continue pressing the bypass button, the
tune indicator will change to rapid blinking
after approximately one second, and the output
will be muted and there will be no sound.
When PANDORA is bypassed or muted, the
tuner will function. Press the bypass button
once again to cancel bypass / mute.
When you select a program, bypass /
mute will be canceled.