Aiwa Z-L520 Operating Instructions Manual page 9

TUNER
BAND
> PRESET
@ CLEAR
Il SET.
<< >>
MULTI
JOG
TUNER
PRESET
The unit can store a total of 32 preset stations for all bands.
When a station is stored, a preset number is assigned to the
station. Use the preset number to tune in to a preset station
directly.
7 Press TUNER/BAND to select a band, and tune in
to a station with << DOWN or PP UP.
2 Press HISET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to.a preset station.
Frequency - Preset number
3 Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
for all the bands have already been stored.
"FULL" is displayed if you attempt to store more than 32 preset
stations.
EE VA a Ras ELE EY LE a TE ae TT
Use the remote control to select the preset number directly.
1 Press BAND while pressing SHIFT to select a
band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10.and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Press TUNER PRESET
repeatedly until the preset number flashes (preset tuning mode),
and turn MULTI JOG. The preset numbers are selected in
sequence as you turn MULTI JOG.
¢ PRESET is also available to select the preset number. Each
time the button is pressed, the next highest number is selected.
To clear a preset station
Select the preset number of the station to be cleared with the
numbered buttons. Then, press ICLEAR, and press IISET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
——";
= 2
if OF
<< >
# PUSH
EJECT
# PUSH
EJECT
DECK 1 DECK 2
This unit is designed for optimal playback of Type I (normal) tapes.
1 Press TAPE/DECK 1/2, then press 4PUSH EJECT
to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press & to start play.
Only the side facing out from the unit can be played back.
The tape counter indicates
Playing deck number __ the tape running length.
To select a playing deck
When tapes are loaded in both decks, press TAPE/DECK 1/2
first to select a deck.
The selected deck number is displayed.
To stop play, press Ml.
To pause play (Deck 2 only), press Hl. To resume play, press
again.
To fast forward or rewind, press << or PP.
Then press I to stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE/DECK 1/2. The power is turned on and play of the
inserted tape begins.
To set the tape counter to "0000".
Press i CLEAR in stop mode.
The counter is also set to "0000" when the cassette holder is
opened.
When tapes are loaded in both decks
After playback on deck 1 finishes, the tape in the deck 2 will start
to play without interruption and will stop at the end of the tape.
(Continuous play)
ENGLISH 9