Denon DCD-3520 Service Manual page 9

ey om me OCOGRAN
oo oo
HH PAUSE aa Leal DIRECT
co co coy cS |
PEs INDEX |} CALL
Remote control unit (om Cc || Co
OSPLAY TIMESEAAC* ALL REPEAT 1
cj co Oo Co
(CLEAR) CLEAR «© TIME a7 SPACE auTO EXT
5 co Co Co
« To correct a programmed track, press the CLEAR button, then program
the correct track. The last programmed track will be cleared and the
correct track will take its place.
e To erase a programmes track, recall it with the CALL button, then press
the CLEAR button and the STOP button, in that order. The track will be
erased.
(4) Playing the Programmed Tracks
e Press the ( ® PLAY) button to play the tracks in the programmed order.
(5) Clearing the Program
e The entire program is cleared when the PROG/DIRECT button is
pressed again. The program is also cleared when the ( & OPEN/
CLOSE) button is pressed.
e If the PROG/DIRECT button is pressed during programmed play, the
program is cleared and playback continues normally through to the last
track on the disc.
NOTES
e If programming is done in the play or pause mode, the track
currently playing is programmed at the first position. Other
tracks can be added to the program, but the number of
programmed tracks and the playing time will not be displayed.
e Direct search is not possible during programmed play. If the
number buttons are pressed, that track is added to the end of the
program.
e Programming is possible with the disc holder open. Track
numbers greater than the number of tracks recorded on the disc
can be programmed, but will be automatically cleared before
[ playback begins.
@ Pausing playback at any point ....
e Playback can be temporarily halted and then continued from the same
point in the track.
1. Press the pause button ( PAUSE) during playback.
2. To continue playback, press the play button ( ® PLAY) or the pause
button (if PAUSE) once more.
7] Searching and Pausing at the Beginning
OPS TACK esses seceeaesoijsceacktsctsiasssaiaenvexetisecsacanibeedhbieacaidbeceonss
(1) With Direct Search
e In this case, the set pauses at the beginning of the track found with the
direct search operation.
1 Press the (4 PAUSE) button.
2 Press the number button(s) for the desired track.
« To start playback, press the ( ® PLAY) or (MH PAUSE) button.
(2) With Program Search
e Press the (1! PAUSE} button after the program search operation is
completed. The set will pause at the beginning of the first programmed
track.
= [index Search |
@ Finding Sections Within a Track
e With this function, you can find and play from the beginning of sections
within the track marked by index numbers.
OOO aonooongonno 9 O D
at
(Number buttons)
(INDEX)
(1) "--"" appears on the TRACK NO. display when the INDEX button is
pressed.
2: Input the track number using the number buttons.
Next, "--" appears on the INDEX display. Input the desired index -
number, and playback will start from that index number.
For example, to start from index 2 on track number 3, press INDEX, 3,
then 2.
Indexes
e indexes are numbers which are assigned to sections within a
track. Check the disc's explanatory notes for the index numbers.
e If you input an index number not on the disc, playback will start
from the last index number on the track.
C9} Repeating playback of ali tracks 0.0... cece eee eeeee Repeat All
(> PLAY) Remote contro! unit
OSALAY TIMESEAAOH ALL REPEAT. 1
(or
CLEAR TIME AUTO PAE F
om co (ALL-REPEAT)
(1) Press the repeat all button (ALL).
{2} Press the play button ( ® PLAY).
e When pressing the repeat all tracks button (ALL), is displayed
e Steps ) and (2) above may be reversed.
e Tocancel repeat playback of all tracks, press the repeat all button (ALL)
once more.
e Pressing the repeat all button (ALL) during programmed playback,
playback of the tracks entered into the memory will be repeated.
@ Repeating a Single Track o.oo eecreeseeeees 1-track Repeat
e Press this button if you want to hear a track repeatedly.
SPAY ee ee |fonocraw
Co co Coco
10 PAUSE a< bal DIRECT
Ca cy Cocoa
esr INDEX CALL P s
co olo Remote control unit
OSPLAY TIME SEARCH ALL -REPEAT-1
on & a)
CLEAR TIME AUTO SPACE AUTO EDT REPEAT;
Ca co co co i { "
e When the 1-track repeat button (REPEAT-1} is pressed during payback,
only the number of the track currently playing will remain ti on the
calendar, as long as the track number is not over 20, and that rack will
be repeated.
e tf the track number is 21 or over, the 1-track repeat function wil work,
but nothing will be lit on the calendar.
9