Operational Notes - Emerson IC695PNS001-BHBF1 2 Important Product Information

GFK-2738AE
Description
Subject
Feature
The following minimum backplane hardware revision must be used:
IC695CHS012-BAMP
IC695CHS012CA-BAMP
or
IC695CHS012-CA (or later)
RX3i
IC695CHS012CA-CA (or later)
backplane
or
hardware
IC695CHS007-AA (or later)
When installing, operating, or maintaining the PNS, personnel must ensure any electrostatic charge is
discharged through the use of a grounded ESD strap or other means.
-JC or later backplanes require R3.40 firmware or later.
For new installations using AC power supplies, the PNS requires an IC695PSA040H or IC695PSA140D (or
higher) revision power supply to ensure compatibility.
Rx3i AC
For retrofit installations using AC power supplies, the PNS may require an IC695PSA040H or
Power Supply
IC695PSA140D (or higher) revision power supply depending on the total current load in the backplane. If the
Compatibility
total current load exceeds the existing power supply's minimum current threshold, no power supply change is
required.
Small form- IC695SPC100A or later
factor IC695SPF002A or later
pluggable IC695SPF550A or later
modules IC695SPF010A or later
RX3i modules For a complete list, refer to Supported Modules, Power Supplies, and Backplanes.
Restrictions and Open Issues
Subject
None

Operational Notes

Subject
Invalid Module Configurations
will cause the respective RX3i
I/O module to fail configuration
Minimum PNS
Version Required
Description
N/A
Description
When the PNS rejects the configuration of an individual I/O module, that
configuration is not delivered to the I/O module, leaving the module in an
unconfigured state. In many modules, this is indicated by the OK Led on the I/O
Module blinking. In addition, I/O point faults will be asserted for that module's I/O.
Correct the configuration of the I/O module and store HWC again.
Refer to the section entitled RX3i PROFINET Scanner Configuration Validation in
PACSystems RX3i PROFINET Scanner Manual, GFK-2737.
Minimum Version Required
IC695CHS016-BAMP
IC695CHS016CA-BAMP
IC695CHS016-CA (or later)
IC695CHS016CA-CA (or later)
Jan 2024
9