Table of Contents
Advertisement
GFK-2738AE
Version
IC695PNS001-ABAK
IC695PNS001-ABAJ
IC695PNS001-ABAH
IC695PNS001-ABAG
IC695PNS001-ABAF
IC695PNS001-ABAE
IC695PNS001-ABAD
IC695PNS001-ABAC
IC695PNS001-ABAA
IC695PNS001-AAAA
Field Upgrade
Upgrade Kit
Part Number:
File Name:
Only IC695PNS001-Bxxx and IC695PNS101-Axxx or later revisions are field upgradable to this release using the
upgrade kit listed above. IC695PNS001-Axxx modules cannot be upgraded with this kit due to hardware and
firmware design changes in the PNS001-Bxxx revision.
Release in line with software license compliance requirements.
®
HART
is a registered trademark of the HART Communication Foundation of Austin, Texas USA. Any use of the term HART hereafter in this
document, or any document referenced by this document, implies the registered trademark.
Firmware
Date
Revision
2.41
Jun 2016
2.40
Nov 2015
2.30
May 2015
2.20
Jun 2014
2.10
Apr 2014
2.00
Mar 2014
1.11
Nov 2013
1.10
Jul 2013
1.00
Jun 2013
1.00
Mar 2013
41G2416-FW01-000-A11
41G2416-FW01-000-A11.zip
Comments
Firmware is not compatible with previous hardware revisions (-
AXXX).
IC695PNS001-BABA is Achilles Level 1 Certified.
Added support for the Remote Get HART Device Information
COMMREQ. Information from a HART device connected to an RX3i
Analog Module in an IC695PNS001 RX3i PROFINET Scanner may
be read into the user application using the Remote Get HART Device
Information COMMREQ.
Added support for additional RX3i I/O modules (ALG106, ALG312,
ALG314, ALG608, ALG628, ALG704, and MDL758)
Added support for HART
®
capable RX3i Analog modules. Also added support for I/O Module
Version information via Explore PROFINET Networks in PME.
Added support for IC695ALG600 (Universal Analog Input Module)
and IC694PSM001 (Power and Sync Measurement Module).
Added support for IC695HSC308 (High-speed Counter – 8 Counters).
Resolution of ALG508, ALG616, and ALG708 modules larger
configuration causing an IOC Software - Module Firmware Fault
when more than three were placed in a PNS001 rack.
Added PROFINET System Redundancy (S2 NAP – supports
Redundant connections from two IO Controllers).
Resolution of PROFINET connection losses and RX3i PNS001
connection issues described hieronder.
Added support for additional RX3i I/O modules (ALG112, ALG626
(No HART), ALG728 (No HART), and ALG808)
Resolution to Analog Output Anomaly issue, described in
PACSystems RX3i PROFINET Scanner IPI, GFK-2738D.
Support for additional RX3i I/O modules (MDL664, MDL765, ALG508,
ALG616, ALG708).
Hardware update for improved manufacturability. No changes to
features, functions, or compatibility
Initial release.
Jan 2024
Pass-Through feature set using HART-
6
Advertisement
Table of Contents
