1210 Gpu Board - Lenovo ThinkPad P17 Gen 1 Hardware Maintenance Manual

When installing:
• Do not touch the areas marked
• Ensure that the fan connector is attached firmly.
• Each screw is marked with a number on the thermal fan assembly. When installing, follow the screw
number to tighten the screws in ascending numerical order; otherwise, the system board assembly might
be damaged.
• If you want to re-use the old thermal fan assembly, remove the thermal grease first, and then apply new
thermal grease to the thermal fan assembly, at an amount of 0.2 grams, before you attach it to the system
board. Either too much or too less application of grease can cause a thermal problem due to imperfect
contact with a component.

1210 GPU board

For access, remove these FRUs in order:
• "1010 Bottom door" on page 64
• "1140 Bottom cover" on page 77
• "1200 Thermal fan assembly" on page 82
2e
2b
2g
a and b in the following illustrations.
2d
2f
2a
2c
2e
.
Chapter 9 Removing or replacing a FRU
83