When installing:
• Ensure that the connector is attached firmly.
• Do not press the top of the fan cover and the fan hub.
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
the parts marked
a
and
of grease can cause a thermal problem due to imperfect contact with a component.
1210 GPU board
For access, remove these FRUs in order:
• "1010 Bottom door" on page 67
• "1140 Bottom cover" on page 78
• "1200 Thermal fan assembly" on page 84
2f
2b
2h
b
as shown in the following illustrations. Either too much or too less application
2d
2g
2a
2c
2e
.
Chapter 9
Removing or replacing a FRU
85