Gable Box/Digital Gable Box; Gable System And Vhf/Uhf Antenna System - Sony BRAVIA KDL-19M4000 Operating Instructions Manual

Cable Box/Digital
Cable Box
"_° To change channels using
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Program will fix the
channel automatically.
Getting Started
Use this hookup if
[] You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
[] You do not intend to hook up any other audio or video equipment to
your TV.
75-ohm coaxial cable
Cable (not supplied)
1
IN _ OUT
jack I l,ack
Also, set Cable toOn intheCablesettings inChannel settings (see page
29).
k
Cable System and
VHF/UHF Antenna
System
A/B
RF Switch
Cable _
Antenna
If you want to watch both antenna (over-the-air) and cable broadcast signals,
you'll need to use an optional A-B RF switch (not supplied), as shown
below.
RearofTV Use the A-B selector to switch between the
CABLE/ANTENNA over-the-air signals and the cable signals. Then
input set the Cable setting in the Channel settings to
On or Off, as described on page 29.
11