Digital Tv Set-Top Box With Component Video Connectors - Sony KP-57WV600 Operating Instructions Manual
Hide thumbs
Also See for KP-57WV600:
- Service manual (444 pages) ,
- Operating instructions manual (106 pages) ,
- Instructions manual (100 pages)
Table of Contents
Advertisement
Digital
TV Set-Top
Box
with
Component
Video
Connectors
To connect a digital TV set-top box with component video connectors
1
Use
three
separate
component
video
cables
to connect
the DVD
player's
Y, PB and
PR jacks
to the Y, PB and
PR jacks
(VIDEO
5) on
the TV.
The Y, PBand PRjacks on your DVD player are sometimes labeled Y,
CB and CR,or Y, B-Y and R-Y. If so, connect the cables to like colors.
2
Use an audio
cable to connect
the set-top
box's audio
output
jacks
to the TV's VIDEO
5 audio
input
jacks.
1
ml
co,or ° de;:p edooo
2
Connectred to red,
white to white, etc.
Audiocable
Componentvideo cables
i
-
._ VIDEO
__VIDEO
@
B
AbrX
@
TO
CONVERTER
©
VHF/UHF
@
Notes on Using This Connection
Watch the digital
TV set-top
box
Label video
inputs
to easily
identify
equipment
connected
to the TV
Press W/VIDE0 repeatedly
to select
the digital
TV set-top
box input
(VIDEO
5
in the illustration).
See the instructions
for setting
up Video Labels On pages
83-84.
You cannot record the signal from any equipment connected into the Y, Pe,
PRjacks.
39
Advertisement
Table of Contents
