Sony BRAVIA KDL-19M4000 Operating Instructions Manual page 17

GettingStarted
2 Secure the TV to the Stand.
Use the optional hardware listed below (not supplied): _.
• M6 x 12-18mm anchor bolt (screwed into the TV's stand). _
• A screw or similar (attach it to the TV stand).
• Rope or chain (stronlz enough to support the weilzht of the TV). Make
sure that there is no excess slack in the rope or chain. _.
An alternative way to secure the TV is with an optional Sony Support
Belt Kit.
_c Anch°r _,_m_
few
F
3
Anchor the TV to the Wall.
Use the hardware listed below (not supplied).
• Two M4 x 12-18ram anchor bolts (screw into the top-most wall-
mount holes located on the rear of the TV).
• Rope or chain (attach to one M4 anchor bolt).
• Wall-anchor (attach to the wall stud) strong enough to support the
weight of the TV (pass the rope through the wall-anchor, then attach
to the other M4 anchor bolt).
Anchor
bolts
Wall-mount
Rope or
i i :6 ::
17