Portable Fuel Tank - Honda BFP8D Owner's Manual

Hide thumbs Also See for BFP8D:
Table of Contents

Advertisement

The transom angle adjusting rod
limits the tilt angle of the outboard
motor when fully lowered.
Proper adjustment prevents the
outboard motor from being tilted too
low (p. 62).
To adjust, f irst tilt the outboard motor
so it is not resting on the rod.
(manual tilt/SH and LH types)
Pinch the end of the rod.
Remove the rod and reinsert it in the
desired position.
Push the rod in and hook the end of
the rod. Then release the rod.
(XH, R, G and T types)
Push the rod in and turn the end of the
rod up, so the latch will fall into line
with the rod.
Push the rod in and turn the end of the
rod down, so the latch will fall to the
locked position. Then release the rod.
Do not allow water to enter the idle
exhaust port or the engine can be
damaged.
IDLE EXHAUST PORT
OPERATION

PORTABLE FUEL TANK

Place the portable fuel tank in a
well-ventilated location, away from
direct sunlight, to reduce the
possibility of a gasoline vapor
explosion.
To ensure that the outboard motor
will be able to draw fuel from the
tank, place the tank within 6 feet
(2 m) of the outboard motor and not
more than 3 feet (1 m) below the fuel
connector on the outboard motor.
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bf9.9dBf8dBfp9.9dBf15dBfp15dBf20d ... Show all

Table of Contents