Honda BFP8D Owner's Manual page 121

Oil capacity
CARB star label
D.C. output
Cooling system
Exhaust system
Spark plugs
Fuel pump
Fuel
Tank capacity
Gear change
Steering angle
Transom angle
Tilt angle
Remote control
steering system
Tuneup
Spark plug gap
Idle speed
Valve clearance
(cold)
Other specifications
Honda outboard motors are power rated in accordance with NMMA procedures and using the ICOMIA standard 28/23.
Engine: 1.1 US qt (1.0 L) without oil filter change
Gear case: 0.31 US qt (0.29 L)
12V – 6A
(Manual tilt type): 5 stages (4°, 8°, 12°, 16°, 20°)
(Manual tilt S and L handle type): 3 stages adjustment (22°, 37° and 63°/transom angle at 12°)
(Manual tilt X handle type, and R type): 3 stages adjustment (22°, 37° and 64°/transom angle at 12°)
0.031 – 0.035 in (0.8 – 0.9 mm)
900 ± 50 rpm
IN: 0.17 ± 0.02 mm
EX: 0.23 ± 0.02 mm
1.2 US qt (1.1 L) with oil filter change
ULTRA · LOW EMISSION
12V – 12A
Water cooling with thermostat
Under water exhaust/thru hub
CR5EH-9 (NGK), U16FER9 (DENSO)
Diaphragm type fuel pump
Unleaded gasoline
(86 pump octane, or higher)
3.2 US gal (12 L)
Forward-Neutral-Reverse (dog type)
45° right and left
(T type): 4 stages (8°, 12°, 16°, 20°)
(T type): Stageless (64°/transom angle at 12°)
–
Refer to page 83.
See shop manual
See shop manual
No other adjustments needed.
TECHNICAL INFORMATION
Outboard motor-mounted
12V – 12A
119