Table of Contents
Advertisement
14. HOW TO REPLACE FLAT PACKAGE IC
14.1. Preparation
- PbF (: Pb free) Solder
- Soldering Iron
Tip Temperature of 700°F ± 20°F (370°C ± 10°C)
Note: We recommend a 30 to 40 Watt soldering iron. An expert
may be able to use a 60 to 80 Watt iron where someone with less
experience could overheat and damage the PCB foil.
- Flux
Recommended Flux: Specific Gravity
Type
RMA (lower residue, non-cleaning type)
Note: See
ABOUT LEAD FREE SOLDER (PbF: Pb free)
14.2. Procedure
1. Tack the flat pack IC to the PCB by temporarily soldering two
0.82.
().
14
Advertisement
Table of Contents
