Table of Contents
Advertisement
3. Place the film cartridge into the film cartridge
chamber and push the back cover release
knob all the way down. (When inserting the
film cartridge, its projecting center drum
must be placed in a downward position.)
4. Operate the film advance lever in several
short strokes until the film has begun to
wind firmly around the take-up drum and
both
sides
of
the
film
perforations
are
securely
engaged
with
the
teeth
of
the
sprocket gear. If the film advance lever locks
during
this
procedure,
press
the
shutter
release button and then continue.
Advertisement
Table of Contents
