Download Print this page

FujiFilm instax square sq 40 User Manual page 11

Hide thumbs Also See for instax square sq 40:

Advertisement

Handling
■ Handling of Camera
1. The camera is a precision instrument, so do not get it
wet, drop it, or subject it to shock. Also, do not place
the camera where it will be exposed to sand, dirt, dust
or other particles.
2. Before using a commercially available strap, check the
strength of the strap. Be especially careful when using
a strap for mobile phones and Smartphones because
such straps are made for lightweight devices.
3. If you are not using your camera for a long period of
time, unload the batteries and keep it where it will
avoid heat, dust and moisture.
4. Remove soil and dust from the viewfinder window,
etc. with an air blower or by wiping gently with a
piece of soft cloth.
5. Do not use solvent such as thinner or alcohol to wipe
off dirt.
6. Do not leave the camera in a closed motor vehicle, on
the beach or in another hot or humid place for any
period of time.
7. Gas containing moth repellent may adversely affect
the camera and INSTAX instant film. Avoid keeping the
camera and INSTAX instant film in a chest of drawers,
etc. with mothballs.
8. The operating temperature range of this camera is
41°F (+5°C) to 104°F (+40°C).
9. This camera may occasionally malfunction because it
is controlled by a micro computer. If it malfunctions,
remove the batteries and then reinsert them to reset
the camera.
10. When taking photos, please be careful not to violate
the rights of others, such as copyright, image rights
and privacy, or violate public order. Any act that
violates the rights of others, or is contrary to public
order or morals, or constitutes a nuisance, may be
subject to legal penalties and claims for damages.
11. This camera is for general household use. It is not
suitable for commercial photography and other
applications where a large number of prints are
needed or involved.
12. Any dirt or dust in the film chamber may affect the
finish of the print. Do not allow the film chamber to
get dirty or dusty.
■ Handling of INSTAX SQUARE Instant Film and Photos
For complete details on the handling of film and photos,
see the instructions written on the FUJIFILM INSTAX
SQUARE instant film box.
1. Keep instant film in a cool place. In particular, do not
leave instant film in an extremely hot place, such as in
a closed motor vehicle, for a long period of time.
2. Use instant film as soon as possible after inserting it
in the camera.
3. If instant film has been kept in a place where the
temperature is extremely low or high, allow it to
become accustomed to a normal temperature before
taking pictures.
4. Use all instant film sheets before the expiration date
referenced on the instant film package.
5. Avoid airport checked luggage inspection and
other strong X-ray exposure. Unused instant film
is susceptible to the effect of fogging, etc. We
recommend that you carry instant film onto aircraft in
carry-on luggage (check with the relevant airport for
more information).
6. Avoid exposing photos to strong light, and store them
in a cool and dry place.
7. Do not tear, cut or make a hole in instant film. Do not
use instant film that is damaged.
8. Do not cut, peel apart or puncture new or newly used
instant print film. Instant film contains small amount
of highly caustic paste; paste can remain active up to
10 minutes after instant photo is taken. Be especially
careful not to let infants or pets put the instant film
into their mouths. Paste should not come in contact
with skin or clothes.
9. If you accidentally touch the paste of unused INSTAX
SQUARE instant print film, immediately wash it off
with plenty of water. If the paste comes into contact
with the eyes or mouth, wash the area and then
seek medical attention. The alkalinity of this INSTAX
SQUARE instant print film will weaken approximately
10 minutes after the instant photo is ejected from
the camera.
10. Do not store instant photos in a sealed bag, as this
may cause discoloration.
11

Advertisement

loading