D-Link DWM-312 User Manual page 51

Section 4 - Con guration
Indicates the ID of the user account.
ID:
Enter the user name of the account.
User Name:
Enter the password of the account.
Password:
Note: Passwords are stored in plaintext and are visible to anyone
with access to the web UI.
If authNoPriv or authPriv is selected under Privacy Mode,
Authentication:
choose SHA1 or MD5 authentication.
If authPriv is selected under Privacy Mode, DES encryption is
Encryption:
available.
Select NoauthNoPriv for no authentication and no encryption,
Privacy Mode:
authNoPriv for authentication only, and authPriv to use both
authentication and encryption.
If encryption is enabled, enter a key between 8 and 27 ASCII
Privacy Key:
characters in length.
Select Read to allow this user read-only access to con guration, or
Authority:
Read/Write to enable full read-write access.
Check Enable to activate the user account. Uncheck to disable the
Enable:
user account.
Click Edit to make changes to the corresponding account.
Actions:
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual
SNMP (Cont)
47