Dhcp - D-Link DWM-312 User Manual

Section 4 - Con guration
The DWM-312 has a built-in DHCP (Dynamic Host Con guration Protocol) server. The DHCP server assigns IP addresses to devices on the network
that request them. By default, the DHCP server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are
automatically assigned to the clients on the network.
Select this box to enable the DHCP server on your router.
Enable DHCP
Server:
Enter the range of IPs for the DHCP server to use to assign IP
DHCP IP Address
addresses to devices on your network. These values will represent
Range:
the last octet of the IP addresses in the pool.
Enter the lease time for IP address assignments.
DHCP Lease Time:
Enter the primary DNS IP address that will be assigned to DHCP
Primary DNS IP
clients.
Address:
Enter the secondary DNS IP address that will be assigned to DHCP
Secondary DNS IP
clients.
Address:
Click Static IP Setting to assign a dedicated IP to a speci ed MAC
Static IP Setting:
address to be saved by the DHCP server.
Select a DHCP client and click Copy to, or enter the MAC address
and IP address manually, to assign the IP address to the MAC
address. Click Enable to enable the rule.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

DHCP

22