Advertisement
The Powerfoot
onyour B USSELL
Uft-Off can be
adjusted todean severaU
fUoor surfaces.
NOTE:For optima_ o_eaning performance, adjust to
the lowest practical setting.
If your cleaner is dN=
fieoN to push, adjust to the next higher setting.
Place Handle in Upright Position.
Turn Height Adiustment Knob to desired setting.
Lowest Setting
= For bare floors.
NlediumSetUogs
-
Forshortandmedium
pile carpets.
Nighest Settiog
-
Forplush pile carpet.
NOTE:Youmay' also adjust the setting while in the Normal
Cleaning Position.
YourBISSELL L ift-Offis not onlya powerfultloor
vacuumcleaner, i t'salsoa vematilestaimandabove
floorvacuumwhenyouselectoned the specialtools,
Note: The too_s can be osed with the
vaooom in the Upright Position or with the
Detachable Canister.
0
Detach the Vacuum Hoseby grasping the HoseGNuand
lifting to separate from the HoseGrip Base.
Attach tools by firmly pushing onto Vacuum Moseor
Telescoping ExtensionWand.
Combioatioo Doating Brash/Upholstery Tooh
Two typesof cleaningtuols are cluaeu m one al_a{_-rent:
rotate for desiredteal,
I
UseBrush side to dust furniture }Hods,bOOKS_mos
shNves, and baseboalds,
I
UsaUpholsteryside tar curtains,draperies,cusHons
fabrics,
Crevice Tool:
Use in tight narrow spaces.
Stair Cleaoiog Teem (Select Models):
Usefor stairs, area rugs, and other small carpeceeareas
This tool can also be used for bare floors.
Note: The Stair C_eaning Too_does not
store on beard.
Nways place vaooom cBeaneron
floor in its laity Upright Position
and make sure it is Booked into
place before removing Canister
or when osing tools. P_aoiogthe
Lift Off in its foil Upright Position
automatically stops the
rotatbl_Lbrosh,
Advertisement
