Advertisement
Use onUy BUSSELL
Style 8 Rephcement
FHters Un y our
BUSSELL
Uft-O_ _.
Unplug the cleaner from electrical outlet.
The Pre-Motor Filter protects the motor from dirt paR_cies. _ t
is located in the slide out tray underneath the Dirt Container.
If the filter becomes dirty, pull out the tray, lift out the filter
and clean. This filter may be hand washed q cola walel
with mild detergent. Rinse well and air ary lnorougmy
before replacing.
The HEPAMedia Post-Motor Filter assists n the filtra-
tion process to return clean air to the room. It is Iocatea
behind the door on the back of the cleaner. If the filter
becomes dirty, open the door, remove the filter and
replace. The HEPAMedia Filter is not washable.
Checkyourvacuumcleaner'sRotatingFloorBrush
and DriveBeltregularlyfor wearor damage.Make
surethe brushand brushendsarefree d debrissuch
as strings,hair,andcarpetfibers.Thesecanwrap
aroundthe brushand hamperits ability to effectively
cleanyour carpet.Alsoremoveanydebristhat has
accumulated underthe brushcover.
Unplug cleaner from electrical outlet.
Remove Detachable Canister from vacuum cleaner.
Recline Handle and turn vacuum cleaner over so Do[iota
side is up.
Remove the six screws as shown with a Phillips
head screwdriver. Lift the Brush Cover off.
Grasp Rotating Floor Brush at both ends and lift
Clean strings, hair and other debris from Rotating Floor
brush, paying particular attention to brush ends
Clean strings, hair and other debris from Motor Pulley aria
Drive Belt areas.
Check Drive Belt carefully for wear, cuts or
stressed areas.
Check Air Passagewayfor obstructions, qemove debris
from this area.
@
Advertisement
