Advertisement
Passageway for obstructions.
An internalthermaU protectorhas beendesUgned
Unto yourcleanerto protectit from overheating.
Whenthe thermal protectoractivates, the main
vacuummotor wiii step operating, Uf t hus
happens,proceedasfellows:
Turn the cleaner OFF (0) and unplug from
electrical outlet.
Air Passagew
Check the Upper Tank area, Pre-Motor Filter and
Pest-Motor Filter for dirt accumulation.
Refer to the "Clearing Clogs" section.
When the motor cools for approximately
30
mieates, the thermal protector automatically
resets and cleaning may continue. It the therma
protector continues to activate after following [ne
above steps, your cleaner may need servicing. Call
BISSELLConsumer Services, or vis_l me wees_le
Note: The therma_ protector coetro_s the main
vaooom motor oe_y, not the brosh motor, mf t he
therma_ protector activates, the hrosh will coo=
tieoe to operate eormaHy; however, there will be
eo sactioe.
Advertisement
