Table of Contents
Advertisement
To Select the DVOR Mode
When entering the NAV band (108.000 - 117.975
MHz), the VXA-300 selects the DVOR mode auto-
matically. The "C
at the upper left corner on the display, and the "
or "
" indicator will appear below the "Course
Indicator" field on the display.
Note: The "C
I
either your aircraft is too far away from the VOR station
or the frequency is not correctly set to that of the VOR
station. Conversely, the "Course Indicator" will indicate
"
" when a localizer signal is being received.
The "
" or "
" flag indicators tell you whether
the VOR navigation information is based on a course
leading to the VOR station or leading away from the
VOR station.
To change the flag from "
press the [ F ] key momentarily, then press the
[ 3 ( FROM )] or [ 2 ( TO )] key, respectively.
The small "C
I
indicators may be toggled to the larger "Frequency"
portion of the display. To do this, press and hold in
the [
(
)] key for 2 seconds to toggle to the larger
display area. Press the [
again to return to the smaller displays.
VXA-300 P
O
VOR N
I
" field will appear
" indicates "
" when
" to "
" or vice versa,
" and "
/
" flag
(
)] key momentarily
M
COURSE Indicator
"
"TO"-"FROM" Flag Indicator
(
)
2 seconds
Hide quick links:
Advertisement
Table of Contents
