Download Print this page

Remote Control Unit - Marantz 50 Owner's Manual

Integrated amplifier
Hide thumbs Also See for 50:

Advertisement

Contents
Connections
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
Batteries are worn out. Replace with new batteries. (v p. 5)
0
Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. (v p. 5)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the q and w marks. (v p. 5)
0
The set's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
0
remote control sensor will not be exposed to strong light.
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
0
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
The remote control code of the volume buttons on the remote control (VOLUME no and :) is set to the mode for operating a Marantz Network CD
0
player. If the volume of this unit cannot be adjusted using the remote control, press and hold ENTER and the number 1 button together for 5 seconds or
more to change the remote control code to AMP operation mode.
When the remote control code setting is set to "AMP1" (Default), the INPUT ml buttons on the remote control cannot be used to switch the input
0
source to "PWR AMP" or switch from "PWR AMP" to another input source. To make remote control operations, change the remote control code setting
to "AMP2" or "AMP3". (v p. 33)
The remote control code between this unit and the remote control is different. Set this unit and the remote control to the same remote control code.
0
(v p. 33)
When using this unit independently, set the switch to INTERNAL. (v p. 22)
0
Front panel
Rear panel
Playback
Settings
Remote control
40
unit
Tips
Index
Appendix

Advertisement

loading