Advertisement
Contents
Connections
Connecting a playback device
You can connect turntables, tuners, Blu-ray disc players, network audio players and CD players to this unit.
This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving
coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
If you set this unit's input source to "PHONO" and you accidentally increase the volume without having a turntable connected, you may hear a hum noise
from the speakers.
Turntable
Tuner
AUDIO
OUT
R
L
R
L
AUDIO
GND
OUT
R
L
L
R
Front panel
Rear panel
Playback
Network audio
Blu-ray disc
player
player
AUDIO
AUDIO
OUT
OUT
R
L
R
L
R
L
R
L
R
R
L
L
Remote control
unit
Settings
CD player
AUDIO
OUT
R
L
R
L
R
L
0 The earth terminal (SIGNAL GND) of this unit is not
0 The PHONO input terminals are equipped with a
19
Index
Tips
Appendix
NOTE
for safety grounding purposes. If this terminal is
connected when there is a lot of noise, the noise can
be reduced. Note that depending on the turntable,
connecting the ground line may have the reverse
effect of increasing noise. In this case, it is not
necessary to connect the ground line.
short pin-plug. Remove this plug to connect a record
player. Store the removed short pin-plug in a safe
place so as not to lose it.
Advertisement
