Advertisement
AV-28WFT1EPG
AV-28WFT1EIS
AV-28WFT1EPS
AV-32WFT1IEPG
AV-28WFT1EKS
AV-32WFT1EPS
AV-28WFT1EK
AV-32WFT1EKS
[Method of adjustment without measuring instrument]
Measuring
2
-
.
Test point
Adjustment part
instrument
Remote
5.COLOUR
control unit
(PAL~NTSC)
PAL COLOUR
(PAL COLOUR)
1.
Receive PAL broadcast.
2.
Select 2.V/C from the SERVICE MENU.
3.
Select 5.;COLOUR with the FUNCTION UP/DOWN key.
4.
Set the
initial setting
value
for PAL
COLOUR
with
the
FUNCTION - or + key.
5.
If the colour is not the best with the initial set value, make
fine adjustment until you get the best colour.
Press the MENU key and memorize the set value.
Adjustment
of SUB
COLOUR I
SECAM COLOUR
(SECAM COLOUR)
Only
4.
Receive a SECAM broadcast.
AV-28WFT1EPG
2.
Make
fine adjustment
of SECAM
COLOUR
in the same
AV-28WFT1EPS
manner as for above.
AV-32WFT1EPG
AV-32WFT1EPS
NTSC COLOUR
(NTSC 3.58 COLOUR)
4.
Input a NTSC 3.58MHz COMPOSITE VIDEO signal from the
EXT terminal.
2.
Make similar fine adjustment of NTSC 3.58 COLOUR
in the
same manner as for above.
(NTSC 4.43 COLOUR)
1.
When NTSC 3.58 is set, NTSC 4.43 will be automatically set at
the respective values.
No. 51694
25
Advertisement
