Safety Precautions ........... 1. Power Source Remote Control Buttons .......... The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting Control Panel Buttons ..........for your convenience. Antenna Connections ..........2.
O/] = StandBy / Power 0 - 9 = Direct Program Colour Buttons Standard Button A (PA) = Programme Up (Cursor Up) MENU = Menu Button = Cursor Right/Volume Teletext / VCR/DVD Control Buttons VCR _ = VCR / _i} / DVD Switch = Stereo ! Bilingual Button (_) = Information Button (Pv)
NOTE: Remove batteries from remote control handsetwhen it is not to be used for a long period. Otherwise it can be damaged Place TV on a solid surface. due to any leakage of batteries. For ventilation, leave a space of at least 10 cm free all around the set.
fore '-' symbol on the second digit disappears. (e.g. for pro- gramme 27, first press 2 and then 7 while program number displayed as '2-' ) Your TV has been designed with a menu system. Display "MENU" (main menu) and enter one of four menus (SOUND, PICTURE, FEATURE and INSTALL).
• Enterthe FeatureMenudirectly, p ressing the YELLOW 2. Press "P A" or "P v" button to select Band. Using "4" or button. "I," button to select the band in which you want to search a channel. Sleep Timer: 3. Press "P A" or "P v"button to select Search.Press "4"...
Page 9
Program. (Programming) Menu in your TV's programme numbers. Afrer APS is finalized, the PROGRAM. menu appears again. Program. (Programming) menu is used to display the pro- To cancel APS, press "STANDARD" button. gramme names and numbers. You can use this menu to de- lete a channel, to insert a channel and to autostore the pro- grammes.
2. Press the VCR / DVD Control Button to control your VCR or DVD player. Note: • If your device is not made by JVC, these buttons cannot be used. How to o • Even if your device is made by JVC, some of these buttons...
To Stop Automatic Page Change How to open the cover The teletext page you have selected may contain more infor- mation than what is on the screen; the rest of the information will be displayed after a period of time. •...
Before connecting anything • Switch off all equipments including the IV. • Read the manuals provided with the equipments. To select an AV mode Pressing "AV" button on the remote control selects one of five AV modes (AV- 1, RGB, AV-2, AV-2S and AV- 3). •...
Via the Euroconnector Your TV set has two Euroconnector sockets. If you want to Care of the Screen connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the AV-1 (SCART 1) or Clean the screen with a slightly damp, soft cloth. Do not use AV-2 (SCART 2) terminals.