Roland VR-6HD Remote Connection Manual page 3

USB Connection
This shows you how to use a USB cable to directly connect your iPad to the VR-6HD.
1.
Connect the iPad to the USB STREAM port on the VR-6HD.
USB Type-C® cable
USB cable
(USB Type-C to A)
2.
Power-on the VR-6HD.
USB Type-C port
Lightning to USB
Lightning port
camera adapter
iPad
1.
Turn on the iPad and launch VR-6HD Remote.
2.
Tap the CONNECT [SETUP] button.
3.
Tap the [USB] button.
When the status icon changes to "USB", the device is connected.
3