Table of Contents
Advertisement
MOBILITY
may not continue automatically after the suc-
cessful installation.
Safety information
NOTICE
The charging socket flap and charging socket
outlet cover may be damaged by strain.
There is a risk of damage to property. Do
not strain the charging socket flap and charg-
ing socket outlet cover, e.g., by dropping the
charging cable.
Battery thermal management
Principle
An optimal high-voltage battery temperature
increases the charging capacity during charg-
ing and shortens the charging time.
General information
Battery thermal management prepares the
high-voltage battery for upcoming charging at
a DC charging station. The temperature of the
high-voltage battery is adjusted for this.
Battery thermal management can reduce
range and increase energy consumption.
Functional requirement
The following requirements must be met for
automatic activation of battery heat manage-
ment.
▷
BMW Navigation route guidance is acti-
vated.
▷
Sufficient remaining range.
Automatic activation
When guidance to a DC charging station
is started, the high-voltage battery is pre-
288
Charging the vehicle
Online Edition for Part no. 01405A88AA4 - VI/23
heated/precooled as much as possible until
the destination is reached.
1.
Apps menu
2.
"Vehicle"
3.
"Charging"
4.
"Pre-condition battery"
5.
Select the desired setting.
Additional information:
Destination input, see Owner's Manual for
Navigation, Entertainment, Communication;
Activating/deactivating manually
Battery preheating/precooling can be activated
and deactivated manually. Certain factors in-
fluence the availability of this function, e. g.,
remaining range.
1.
Apps menu
2.
"Vehicle"
3.
"Charging"
4.
"Pre-condition battery"
5.
Select the desired setting.
Starting the charging process
1.
Engage selector lever position P. Set the
parking brake, if needed.
2.
Set charging mode or schedule charging
process.
Scheduling the charging process, see
Charging in the time frame, refer to
page 289.
3.
Switch off drive-ready state.
4.
Connect the Mode 2 charging cable to
the domestic socket outlet or the Mode 3
charging cable to the port at the AC charg-
ing station as needed.
5.
Connect the charging cable to the vehicle.
Connecting the charging cable, refer to
page 285.
6.
Lock vehicle if it is unlocked.
OwnersManuals2.com
Advertisement
Table of Contents
