Table of Contents
Advertisement
CONTROLS
When stopping the vehicle
Selector lever position D or R
On inclines, the system prevents rolling back
against the set driving direction and provides
drive-off support.
Selector lever position B
The system prevents the vehicle from rolling
away when the vehicle has come to a standstill
and the accelerator pedal is not pressed.
When the vehicle is stationary, the parking
brake is automatically applied under the fol-
lowing conditions:
▷
Drive-ready state is switched off.
▷
The driver's door is opened.
Driving off
Engage a gear position and step on the accel-
erator pedal to drive off.
The parking brake is released automatically.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is supposed to
roll without its own power for a short distance,
for instance in a car wash or to be pushed.
Engaging selector lever position N
NOTICE
Selector lever position P is automatically en-
gaged when standby state is switched off.
The wheels are blocked. There is a risk
of damage to property. Do not switch off
standby if the vehicle is meant to coast, e.g.,
in a car wash.
1.
Switch on drive-ready state while pressing
on the brake pedal.
2.
If necessary, release the parking brake.
122
Driving
Online Edition for Part no. 01405A88AA4 - VI/23
3.
If necessary, switch off Automatic Hold.
4.
Depress the brake pedal.
5.
Touch the selector lever lock and engage
selector lever position N.
6.
Switch off drive-ready state.
In this way, standby state remains switched
on, and a Check Control message is dis-
played.
The vehicle can roll.
Irrespective of standby state, the selector lever
position P is automatically engaged after ap-
prox. 35 minutes.
If the system is not operational, you may not
be able to change the selector lever position.
Electronically unlock the transmission lock, if
needed.
Electronic unlocking of the
transmission lock
General information
Unlock the transmission lock electroni-
cally, e.g., to maneuver the vehicle out of a
hazardous area in the event of a malfunction.
Before unlocking the transmission lock, secure
the vehicle against rolling away, for instance
with a wheel chock.
Engaging selector lever position N
1.
Quickly press the Start/Stop button three
times without stepping on the brake.
2.
Depress the brake pedal.
3.
Press the selector lever to position N.
An appropriate Check Control message is
displayed.
Position N is indicated on the selector lever.
4.
Maneuver the vehicle from the hazardous
area and secure it against rolling away.
OwnersManuals2.com
Advertisement
Table of Contents
