Ricoh IM 7000 User Manual page 81

2023/05/01 14:32
You can view the protocol setting methods in the following list:
1: Control Panel 2: Web Image Monitor 3: telnet 4: Device Manager NX 5: Remote
Communication Gate S
Protocol/Port
IPv4
-
IPv6
-
IPsec
-
FTP
TCP:21
telnet
TCP:23
SMTP
TCP:25 (variable)
HTTP
TCP:80
HTTPS
TCP:443
SMB
TCP:139
TCP:445
NBT
UDP:137/UDP:138
https://support.ricoh.com/services/device/ccmanual/IM_7000-8000-9000-re/en-GB/security/int/control.htm
Access Control | User Guide | IM 7000, IM 8000, IM 9000
Setting Function that cannot be used when
method
1, 2, 3 All applications that operate over IPv4
(IPv4 cannot be disabled from Web Image Monitor
when using IPv4 transmission.)
1, 2, 3 All applications that operate over IPv6
1, 2, 3 Encrypted transmission using IPsec
2, 3, 4, 5 Transmissions that require FTP
(You can restrict only the personal information from
being displayed by settings on the control panel.)
2, 4 Transmissions that require telnet
1, 2, 4, 5 E-mail notification function that requires SMTP
reception
2, 3 Transmissions that require HTTP
Print using IPP on port 80
2, 3 Transmissions that require HTTP
(You can make settings to require SSL transmission
only and to reject non-SSL transmission using the
control panel or Web Image Monitor.)
1, 2, 3, 4, Transmissions that require SMB
5
3 SMB print via TCP/IP
NetBIOS designated functions on the WINS server
Protocol/Port is disabled
3/12