JVC PC-X110 Manual page 23

Table of Contents

Advertisement

PC-X110 B/E/G/GI/EN
©
Volume setting and fade-in operation
YoleS
Yol3
»" When the volume is set to level 25.
When the volume is set to level 3.
JOAQ|
QUIN|CA
emp
When the volume is set to level 2.
When the volume is set to level 1.
0
Timer operation time samp
i
i
iti
i
i
To cance! timer
© When the power is switched on, it is possible to fade in
hg
the sound from volume level 0 (zero) to the preset
Set the POWER button to on, then press the TIMER
ON/OFF (@)>) button while pressing
the SHIFT button,
volume.
so that the timer mode indicator ((@)) goes out.
Notes:
©
When the volume setting is set to "Vol -" (volume level
isnot specified), the timer playback volume is set to that
of before setting the timer.
To stop during timer: playback, press the POWER
button-to:switch the unit off.
@
In the fade-in mode, the volume gradually increases
from zero.
SLEEP OPERATIONS
Use this when
you want to fall aalee? while
© The sleep operation will start and the power will be
listening to a tape, radio broadcast or CD.
switched off after the specified time. (Tuner & CD
modes)
©
Set to the required source.
The power will not be switched off at the specified time
during tape operation and will be switched off at the
Operations
tape-end.
Radio broadcast | Press the TUNER/BAND button to set to
the tuner mode and tune to the required
© Checking the sleep time
frequency.
When the SLEEP button is pressed, the remaining
CO play
Load a disc and press the ®/18 button to
sleep time is displayed. If it is pressed again, a new
play the disc.
sleep time canbe set.
Tape playback | Load a cassette and press the » PLAY
© Tocancel the
operation
button to play back the tape.
Press the POWER
button to switch the power off or
Press the SLEEP button until the sleep time indicator
disappears.
®
Press the SLEEP button to set to the sleep time.
SLEEP
Aim 60—-90 — icf
L 'Source
mode display (Releasing
the sleep mode)
© Sleep times of 30, 60, 90 or 120 minutes can be
set.
When you release the SLEEP button, the source
is displayed after 10 sec.
G
[SLEEP] is shown in the display
(No. 1904) 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-x110 bPc-x110 ePc-x110 gPc-x110 giPc-x110 en

Table of Contents