Table of Contents
Advertisement
PC-X110 B/E/G/GI/EN
Preset tuning (using the remote control unit)
©
The stations must be preset before this operation can
be performed.
@ Press the TUNER/BAND button.
® Select the band (FM or AM(MW/LW)) using the TUNER
IBAND button.
@® Press the required preset station buttons (No. 1 — No.
10, +10).
@
The
preset
station
number
and
frequency
corresponding to the button pressed are shown.
@ Press the PRESET SCAN button.
® Scanning is performed in the order of preset station in
heard under certain conditions when non-preset stations are
scanned.
Using the antennas
( RECORDING
FM
©
In recording, the ALC circuit automatically optimizes
the recording level; adjustment of the recording level is
unnecessary.
©
Check that the safety tab on the cassette tape is not
broken off.
Notes:
1. The recording characteristics of this unit are those of
normal tape. Normal tape has different characteristics
from CrO, and metal tapes.
2. Do not operate any button on deck B during recording.
It should be noted that it may be unlawtul to re-record
pre-recorded tapes, records, or discs without
the consent
of the owner of copyright in the sound or video recording,
broadcast
or cable programme
and in any literary,
dramatic, musical, or artistic work embodied therein.
Note:
The built-in ferrite core antenna can pick up interference
from television receivers in the neighborhood and thereby
disturb AM(MW/LW) reception.
(No. 1904)
17
Advertisement
Table of Contents
