International CUB CADET 86 Operator's Manual page 64

SETTING UP
STEP 1. GAUGE WHEELS, BRACKETS, DEFLECTOR
SHIELD, MOWER BELT COVER, AND SUPPORT
CLEVISES
44 AND 50-INCH MOWER (50-INCH SHOWN)
Six carriage bolts Support Sprinq
3/8x 1-1/4-inches, pin /
lock washers, and / Spirol
nuts /
Flat washers
13/32
X
13/16
X.
065-inch
\J|
|||l*~Gouqe wheel ormi
■— Jam nut
Lock washer
Bracket
\ Gauge wheel
Shoulder bolt
Two support clevises
and nuts on top, and
two nylon lock nuts
on the bottom
Deflector shield
Mower belt cover
two 5/16 X 5/8-inch
hex head cap screws,
lock washers, and nuts
eight 5/16 x 3/4-inch hex
head cap screws, flat
washers, and nuts
«U#020 A
NOTE: The 44-inch mower belt cover requires only seven cap screws.
61