International CUB CADET 86 Operator's Manual page 62

SETTIIMG UP
STEP 4. ATTACHING LIFT FRAME ASSEMBLY TO
TRACTOR
38-inch MOWER
place pivot arm around the
plotform support shaft.
-w
Two flat washers
17/32 X 1 X .029-inch
and quick * attachable
cotter pins.
See Note.
Tractor quick*
hitch assembly
Latch assembly
in place on
tractor frame.
NOTE: Set the tractor lift mechanism in the lowest position before connecting the lift links to the
tractor lift arms.
Check mower for correct level. If more than 1/4-inch difference, (side to side) correct. Refer to leveling
instructions.