International CUB CADET 86 Operator's Manual page 41

LUBRICATION GUIDE
International Cub Cadet 86,108 and 128 Tractors
- Periodic
Transmission
6 - Oil level and filler plug.
7 - Oil drain plug.
Check the oil level periodically. Keep the lubricant up the
the level plug (6) on the rear of the transmission case.
Creeper drive housing
8 - Level plug.
9 - Breather and filler plug.
10 - Drain plug.
Check the oil level periodically. Keep the lubricant up to
the level plug (8) on the left side of the creeper drive
housing.
11 - Steering gear housing.
Once a year, apply two strokes of the lubricator, using IH
251H EP grease or equivalent #2 multi-purpose lithium
grease.
NOTE: To locate the lubrication fitting, remove bottom
shield and turn the front wheels to the maximum right turn
position. Then reach up under the right side of the tractor
frame to locate the fitting.
Miscellaneous
Lubricate the clutch pedal shaft and linkage with eight or
ten drops of engine oil.
38