International CUB CADET 86 Operator's Manual page 63

SETTING UP
STEP 5. ATTACHING MOWER TO LIFT FRAME
ASSEMBLY ON TRACTOR
38-INCH MOWER
1. Raise the lift frame and turn the front wheels to the right.
2. Slide the mower under the tractor from the right until centered.
3. Lower the lift frame.
4. Raise the front of the mower and slide back to slip clevises over pivot links.
5. Release support pins and connect into lift linkage arms.
If the spring loaded support pins do not line up with holes in the lift frame, loosen bolts holding the
support pin brackets to the mower housing. This will align the pins with the holes in the lift frame to
mount the mower. After mounting, retighten the bolts.
Refer to the ADJUSTING AND OPERATING under "Level Adjustment", "Height of Cut", and "V-Belt
Adjustment" for the necessary adjustments.
60