Braun IRT6575 Manual page 10

Last reading recall
The previous measurement will be displayed during start up .
Then, the measurement will be displayed in the
upper right-hand corner of the display with an 'M'
next to it .
The memory in the upper right corner will update to the new reading with the first button press
after the reading is completed .
Setting a default Age Precision™ Technology value
You have the option to set a default Age Precision™ Technology age group . This will allow the device to power on and be
used in default selection without re-selecting with each power on .
1 . When the device is off, hold both the power button and the Age Precision™ Technology button
for 4 seconds, the backlight will turn blue, you can then release the buttons .
2 . All Age Icons will flash continuously until the Age Precision™ Technology button is pressed .
3 . Press the Age Precision™ Technology button, the 0-3 month icon will be filled in and flash and
the other icons will be empty . A second button press will advance to the 3-36 month icon
flashing, a third will advance to 36+months flashing . This cycle continues in order with each
button press . A full beep will sound with every button press .
4 . After 3 seconds of no button press, the displayed icon will remain on the screen and a full beep
will sound . The device will turn off . When the device is turned back on, the default will be set .
Default will be set on the device until the batteries are removed and then put back in .
8
4 sec
4 sec
4 sec
4 sec
3 sec