Specifications - Sony HT-C800DP Operating Instructions Manual

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 20,000 Hz; rated
60 watts per channel minimum RMS power, with 11omore than 0.7 %
total harmonic distortion fi'om 250 milliwatts to rated output (USA
model only).
Amplifier section
Rated Powel Output at Stereo Mode 60 W + 60 W (6 ohms, at 1 kHz, THD 0.7 %)
Reference Power Output Front: 100 W/ch (6 ohms at 1 kHz, THD 10 %)
Center*: 100 W (6 ohms at I kHz, THD 10 %)
Smround*: 100 W/ch (6 ohms at 1 kHz, THD 10 %)
Sub woofer*: 100 W (6 ohms at 100 Hz, THD 10 %)
* Depending on the soundJhdd setlings and the source, there moy be no sound output.
Inputs (Analog)
Outputs (Analog)
CD/DVD system
Laser
ANALOG IN:
Sensitivity: 500 mV
Impedmlce: 50 kilohms
PHONES:
Accepts low- and high-impedance headphones
Semiconductor laser
(DVD: Z - 650 nm)
(CD:X 780nm)
Emission duration: continuous
Signal format system NTSC/PAL or NTSC
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (+1.0 dB)
CD: 2 Hz to 20 kHz (J:1.0 dB)
Signal-to-noise ratio More than 80 dB
Harmonic distortion Less than 0.03 %
78Gz