Specifications - Sony HT-DDW830 Operating Instructions Manual

Specif icat ions
AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND
TOTAL HARM ONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 40 -
20,000 Hz; rated 100 w atts
per channel minimum RM S
pow er, w ith no more than
0.09% total harmonic
distortion from 250
milliw atts to rated output
(USA model only).
Am plif ier sect ion
M odels of area code U, CA
Rated Pow er Output at Stereo mode
Reference Pow er Output
M odels of area code AU, SP
Rated Pow er Output at Stereo mode
Reference Pow er Output
1) Depending on the sound field settings and
sources, there may be no sound output.
46
Downloaded from: https://www.usersmanualguide.com/
(8 ohms 40 Hz - 20 kHz,
THD 0.09%)
100 W + 100 W
(8 ohms at 1 kHz, THD
0.7%)
1)
Front : 100 W/ch
1)
Center : 100 W
1)
Surround : 100 W/ch
(8 ohms at 1 kHz, THD
0.7%)
100 W + 100 W
(8 ohms at 1 kHz, THD
10%)
1)
Front : 110 W/ch
1)
Center : 110 W
1)
Surround : 110 W/ch
Frequency response
MULTI CH IN, CD,
MD/TAPE, DVD/
LD, TV/SAT,
VIDEO, AUX:
10 Hz - 50 kHz +0.5/
–2 dB (with sound
field and equalizer
bypassed)
Inputs (Analog)
MULTI CH IN, CD,
DVD/LD, MD/
TAPE, TV/SAT,
VIDEO, AUX:
Sensitivity: 250 mV
Impedance: 50
kilohms
a)
S/N : 96 dB (A, 250
b)
mV )
a) Input short.
b) Weighted network, input level.
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB (A, 20
kHz LPF)
DVD/LD, TV/SAT
(Optical):
Sensitivity: –
Impedance: –
S/N: 100 dB (A, 20
kHz LPF)
Outputs
MD/TAPE (OUT);
VIDEO (AUDIO
OUT):
Voltage: 250 mV,
Impedance: 10
kilohms
SUB WOOFER:
Voltage: 2 V
Impedance: 1
kilohms
PHONES:
Accepts low- and
high-impedance
headphones
EQ ±6 dB
Sampling Frequency
48 kHz (TV/SAT,
OPTICAL IN)
96 kHz (DVD/LD
OPTICAL IN,
COAXIAL IN)