Advertisement
System connections
Make connection as shown below. When connecting the related system components, refer also to the instruction manuals
of the related components.
/
Do not plug in the power !ead until all connections are completed.
KT-6050
To wall AC outlet
i
System control cord
pe
System control connection
By connecting this unit to an amplifier equipped with KENWOOD
© Be sure to insert the system control cord plugs fully into the
system control terminals, using the amplifiers remote control, various
SYSTEM CONTROL terminals.
system operations (such as switching the power supply ON/OFF,
@ If the system control cord and audio cords are not connected
band switching preset call, etc.) are possible. For details refer to your
properly, the automatic system governing remote control and
—
amplifier's instruction manual.
system functions will not operate.
If your amplifier is not equipped with the SYSTEM CONTROL termi-
nals, do not connect anything to any SYSTEM CONTROL terminal.
Do not connect the unit in any system configuration other than
specified.
,
ie
Notes:
1. Connect ail cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet.
Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit.
6 KT-6050 (En)
Advertisement
