Advertisement
Receiving broadcasts
TUNING/PTY SEL knob
Turning ON the power
BAND key
°
On/STANDRY
ER
}
AUTO / MANUAL key
ACTIVE RECEPTION key
TUNING MODE key
M@ Auto tuning
| 1 Set your amplifier's input selector to TUNER.
2
Select the broadcast band.
The bands are switched as follows
every time the
[BAND]
key is pressed.
Ma—aM
FM 86g aGg.
3 Set the tuner to auto tuning mode.
Check that the indicator is lit.
Press the AUTO / MANUAL key.
FM
9258.
Press the key to select the auto (AUTO lighted) or manual (not lighted) mode.
4 Turn the ACTIVE RECEPTION ON.
The tuner automatically sets the optimum conditions
Lights.
for receiving FM broadcasts. (See page 19.)
aeriey Aeaerniom
so —
tr
TIZIibiogsem
925a.
@ This key does not function when AM broadcasts are received.
--.FM
GF4G.
i 5 Tune in the desired station.
Main unit
Remote control unit
FM CHANNEL STEP (Oniy with separately
°
sold remote control units):
M
= | &
TUNING/
vroniue
—>
ee
ce
For each pressing of the 50/100kHz key,
caeee
so/iooKw
the FM frequency of the CHANNEL STEP
TUNING /PTY SEL
(interval) is switched 50kHz-100kHz.
This is convenient for responding to dif-
ferent frequencies
(transmitted
radio
waves)
corresponding
to a particular
country or region.
Set to TUNING mode.
Turn gently to the left or right.
@ To tune in a higher frequency, gently turn the TUNING/PTY SEL knob to the right.
@ To tune in a lower frequency, gently turn the TUNING/PTY SEL knob to the left.
@ The tuner automatically scans the frequencies in sequence and stops at the frequency of the next broadcast station.
12 kT-6050 (En)
oe ene
Advertisement
