Advertisement
Before applying power
For the U.S.A. and Canada
Important!
Units shipped
to the
U.S.A.
and
Canada
are designed
for
operation on 120 volts AC only.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wall socket prior to
any internal examination.
The wires in this mains lead are coloured in accordance with the
following code:
BUG os iocdececadsselstessecsbedvtctostieveessaccebasenys Neutral
BROW) scat ssussGezcondectovesaiicatcsvnsonschotsesnonncs Live
The wires in this mains lead must be connected to the terminals
in the plug as follows:
Wire colour
Plug terminal marking
BUG: tenets Qieteveveazatedeleteosccbisbarsosnecaxekes N or. Black
BROW Adis cccpvacavexcocarsvisaredversactaueesseveses L or Red
Blue to
Neutral
Plug
Notes;
1. lf a 13-amp plug is used, this must be fitted with a 13-amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must be
connected to the E terminal.
Safety precautions
A Caution: Read this page carefully to ensure safe operation.
For Australia and Europe
Important!
Units shipped to Australia are designed for operation on 240 V AC
only.
Units shipped to Europe are designed for operation on 230 V AC only.
For other countries
important!
Units shipped to countries other than the above countries are equipped
with an AC voltage selector switch on the rear panel.
Refer to the
following paragraph for the proper setting of this switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC voltage
selector switch Type A or Type B on the rear panel is set to the
voltage that prevails in the area to which the unit is shipped. Before
connecting the power cord to your AC outlet, make sure that the
setting position of this switch matches your line voltage.
If not, it
must be set to your voltage in accordance
with the following
direction.
AC voltage selector switch
<_
TypeA
(I
AC110- «>
AC 220-
120V~
240 V ~
—_—_
—_
Type B
EERE UH
AC 110-
120V~
AC 220V~
AC 230-240V~
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector switch.
TO RAIN OR MOISTURE.
CAUTION
"RISK OF ELECTRIC SHOCK"
DO.NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE, REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOL-
TAGE" WITHIN THE PRODUCT'S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) IN-
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
KT-6050 (En)
3
Advertisement
