Panasonic SC-AK44 Operating Instructions Manual page 20

?
$
$
=
3
2
;
S
2
$
$
2
$
Š
ROQT5621
Tab for side "B" Tab for side "A"
SLES onty
Normal position tape Hi-position tape
5
Detection hole
Listening to tapes ă |
LE To fast-forward or rewind the tape
Press [@<4/<4<4] of [>> />P 1] in the stop mode.
Tape direction To fast-forward
eee |
[> P|] Medea)
aaraa
A To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.
Press [@<4/<4<4] or Pæ] during play.
| Note |
è TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
SCFAK33
Before recording (Deck 2 only)
Types of tapes which can be recorded correctly
Use normal and high position tapes.
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
The unit automatically identifies the type of tape.
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
J frase prevention SCS
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
How volume, sound quality/field affect recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field.
J To erase a recorded sound |
1. Press [TAPE, DECK 1/2].
2. Insert the recorded tape into deck 2.
3. ERTS) oniy
Press [REV MODE] to select reverse mode.
4. Press [(@ REC/STOP}.
e You cannot open deck 1 while recording.
è You cannot fast-forward or rewind one deck while recording with
the other.